Delfield’s Hot Food Wells
Delfield has been known for their reliable and safe food holding, and the Drop-in style Energy Saving Power (ESP) low watt hot food well is no exception!
The ESP low watt food well can both be used as a drop-in or a built-in unit. It provides great temperature performance, flexibility to be built together into multiple wells while maintaining individual controls for each well, and NSF certification for food safety.
Features:
- 87” x 19.87” single hot food wells are manifolded together standard to one main gate valve
- Energy efficient 500 watt heat-pad per well
- Energy Savings Power wells (ESP)
- Flush mounted die stamped frawn 12″ x 20″ individual 20-gauge wells
- Galvanized exterior body
- Individual digital temperature controls standard wired to one main control panel with 4’ of conduit and wire. Field install control panel at location
- Must be hard wired in the field
- Non-marring press fit top gasket
- Standard 1/2″ stainless steel drain(s)
- Top is constructed of 18-gauge stainless steel
- Unit shall be insulated on the bottom and all sides with 1” of fiberglass
- Wells depressed slightly into the top to hold in condensation
- Wet and dry operation